Luthier Kit

The perfect vacuum press for laminating the sides of acoustic guitars and other guitar elements.

Thin Air Press 10.5x40” Bag Project Size Guidelines:

Project stack width PLUS thickness must be less than 6.5”

Project stack length PLUS thickness must be less than 34”

Thin Air Press 26x28” Bag Project Size Guidelines:

Project stack width PLUS thickness must be less than 22”

Project stack length PLUS thickness must be less than 21”

It is important not to have the seams stretched open when it is under vacuum, as it will split them apart. These guidelines ensure that there is a recommended 2” wide perimeter of flat vinyl all around the project in the bag.

The TAP 10 Luthier Kit contains:

• a 10.5x40" vinyl vacuum bag with a Quick-Lock connector installed at one end of the bag
• an opening seal attached to the TAP bag
• a clear acrylic TUG External valve with one-way valve and Quick-Lock connector
• 1/4" tubing
• a high-pressure manual vacuum hand Super Pump
• breather netting
• extra sealing tape
• illustrated instructions 

The TAP 26 Luthier Kit contains:

• a 26x28" vinyl vacuum bag with a Quick-Lock connector installed in the center
• an opening seal is attached to the TAP bag
• a clear acrylic TUG External valve with a one-way valve and Quick-Lock connector
• 1/4" tubing
• a high-pressure manual vacuum hand Super Pump
• breather netting
• extra sealing tape
• illustrated instructions 

The TAP 10 + 26 Luthier Kit contains:

• One 10.5x40" and one 26x28" vinyl vacuum bag with Quick-Lock connectors installed
• an opening seal attached to both TAP bags
• a clear acrylic TUG External valve with a one-way valve and Quick-Lock connector
• 1/4" tubing
• a high-pressure manual vacuum hand Super Pump
• breather netting
• extra sealing tape
• illustrated instructions